Table of Contents
rudder (pre-engine removal)
remove engine
rudder
head
propane locker
misc
supplies
boatyard
rudder (pre-engine removal)
verify tiller angle/sweep obstructions
test against proposed cockpit backrests
measurements for tiller → rudder attachment bracket design
remove from boat
remove engine
remove from boat
crane
Danish Marine - 503-289-1436
remove driveshaft, cutlass bearing
remove/redesign skeg?
rudder
verify/reshape to design profile if necessary
sand, surface & prep for paint
design/install windvane attachment points onto rudder
head
cut in new door
patch aft opening
install head/nav station bulkhead
prep head floor & shower pump
remove seacock, patch hull
propane locker
design/construct deck surface hatch
design/construct container
misc
demo existing depth transducer
confirm sizing for new transducer housing
measure port hole spacing
re-mark/cut for new spacing/symmetry
supplies
chain hoist, trolley, ibeam
crane
SS hardware for propane access hatch
McMaster
order (Thurs 4/28)
shop/home
buy/setup bandsaw
new bandsaw outlet
same circuit as table saw - convert to 220V?
build frame (with hinges) for sewing machine
test water pump
test instruments
bottle opener on plate steel geometry?